The Facts About Fillings
The durability of any dental restoration is influenced not only by the material it is made
from but also by the dentist’s technique when placing the restoration.
Other factors include the supporting materials used in the procedure and the patient’s cooperation during the procedure.
The length of time a restoration will last depends upon your dental hygiene, home care,
and diet and chewing habits.
Dental Materials Fact Sheet
What About the Safety of Filling Materials?
Patient health and the safety of dental treatments are the primary goals of dental professionals and our PORUR TOOTH Centre.
The purpose of this fact sheet is to provide you with information concerning the risks and benefits
of all the dental materials used in the restoration (filling) of teeth.
Your dentist wishes to provide this fact sheet to every new patient and all patients of record only once before beginning any dental filling procedure. As the patient or parent/guardian, you are strongly encouraged
to discuss with your dentist the facts presented concerning the filling materials being considered for your particular treatment.
Allergic Reactions to Dental Materials
Components in dental fillings may have side effects or cause allergic reactions, just like other materials we may come in contact with in our daily lives. The risks of such reactions are very low for all types of filling materials.
Such reactions can be caused by specific components of the filling materials such as mercury, nickel, chromium, and/or beryllium alloys.
Usually, an allergy will reveal itself as a skin rash and is easily reversed when the individual is not in contact with the material.
There are no documented cases of allergic reactions to composite resin, glass ionomer, resin ionomer, or porcelain.
However, there have been rare allergic responses reported with dental amalgam, porcelain fused to metal, gold alloys, and nickel or cobalt-chrome alloys.
If you suffer from allergies, discuss these potential problems with your dentist before a filling material is chosen.
*******************************************************************************
Dental Materials – Advantages & Disadvantages
PORCELAIN FUSED TO METAL
This type of porcelain is a glasslike material that is
“enameled” on top of metal shells.
It is tooth colored and is used for crowns and fixed bridges.
Advantages
❤ Good resistance to further
decay if the restoration fits well
❤ Very durable, due to metal
substructure
❤ The material does not cause
tooth sensitivity
❤ Resists leakage because it can
be shaped for a very accurate fit
Disadvantages
• More tooth must be removed
(than for porcelain) for the metal substructure
• Higher cost because it requires
at least two office visits and
laboratory services
GOLD ALLOY
Gold alloy is a gold-colored mixture of gold, copper, and other metals and is used mainly for crowns and fixed bridges and some partial denture frameworks.
Advantages
❤ Good resistance to further
decay if the restoration fits well
❤ Excellent durability; does not
fracture under stress
❤ Does not corrode in the mouth
❤ Minimal amount of tooth needs
to be removed
❤ Wears well; does not cause
excessive wear to opposing teeth
❤ Resists leakage because it can
be shaped for a very accurate fit
Disadvantages
• Is not tooth colored; alloy is yellow
• Conducts heat and cold; may irritate sensitive teeth
• High cost; requires at least two
office visits and laboratory
PORCELAIN (CERAMIC)
Porcelain is a glass-like material formed into fillings or crowns using models of the prepared teeth.
The material is toothcolored and is used in inlays, veneers, crowns and fixed bridges.
Advantages
❤ Very little tooth needs to be
removed for use as a veneer;
more tooth needs to be removed for a crown because its
strength is related to its bulk(size)
❤ Good resistance to further
decay if the restoration fits well
❤ Is resistant to surface wear but
can cause some wear on opposing teeth
❤ Resists leakage because it can
be shaped for a very accurate fit.
❤ The material does not cause
tooth sensitivity
Disadvantages
• Material is brittle and can break
under biting forces
• May not be recommended for
molar teeth
• Higher cost because it requires
at least two office visits and laboratory services
NICKEL OR COBALT CHROME ALLOYS
Nickel or cobalt-chrome alloys are mixtures of nickel and chromium.
They are a dark silver metal color and are used for crowns and fixed bridges and most partial denture frameworks.
Advantages
❤ Good resistance to further
decay if the restoration fits well
❤ Excellent durability; does not
fracture under stress
❤ Does not corrode in the mouth
❤ Minimal amount of tooth needs
to be removed
❤ Resists leakage because it can
be shaped for a very accurate fit.
Disadvantages
• Is not tooth colored; alloy is a
dark silver metal color
• Conducts heat and cold; may
irritate sensitive teeth
• Can be abrasive to opposing
teeth
• High cost; requires at least two
office visits and laboratory services.
• Slightly higher wear to opposing teeth
GLASS IONOMER CEMENT
Glass ionomer cement is a selfhardening mixture of glass and organic acid.
t is tooth-colored and varies in translucency.
Glass ionomer is usually used for -
- small fillings,
- cementing metal and porcelain/metal crowns, liners,and
- temporary restorations.
Advantages
❤ Reasonably good esthetics
❤ May provide some help against
decay because it releases fluoride
❤ Minimal amount of tooth needs
to be removed and it bonds well to
both the enamel and the dentin beneath the enamel
❤ Material has low incidence of
producing tooth sensitivity
❤ Usually completed in one dental visit
Disadvantages
• Cost is very similar to composite resin
(which costs more than amalgam)
• Limited use because it is not
recommended for biting surfaces in permanent teeth
• As it ages, this material may become rough and could
increase the accumulation of plaque and chance of periodontal disease
• Does not wear well; tends to
crack over time and can be dislodged
RESIN-IONOMER CEMENT
Resin ionomer cement is a mixture of glass and resin polymer and organic acid that hardens with exposure to a blue light used in the dental office.
It is tooth colored but more translucent than glass ionomer cement.
It is most often used for small fillings,
cementing metal and porcelain metal crowns and liners.
Advantages
❤ Very good esthetics
❤ May provide some help against
decay because it releases
fluoride
❤ Minimal amount of tooth needs
to be removed and it bonds well to both the enamel
and the dentin beneath the enamel
❤ Good for non-biting surfaces
❤ May be used for short-term
primary teeth restorations
❤ May hold up better than glass
ionomer but not as well as
composite
❤ Good resistance to leakage
❤ Material has low incidence of
producing tooth sensitivity
❤ Usually completed in one dental
visit
Disadvantages
• Cost is very similar to composite resin
(which costs more than amalgam)
• Limited use because it is not recommended to restore the biting surfaces of adults
• Wears faster than composite and amalgam
DENTAL AMALGAM FILLINGS
Dental amalgam is a self-hardening mixture of silver-tin-copper alloy powder and liquid mercury and is sometimes referred to as silver fillings because of its color.
It is often used as a filling material and replacement for broken teeth.
Advantages
❤ Durable; long lasting
❤ Wears well; holds up well to the forces of biting
❤ Relatively inexpensive
❤ Generally completed in one visit
❤ Self-sealing; minimal-to-no shrinkage and resists leakage
❤ Resistance to further decay is high, but can be difficult to find in early stages
❤ Frequency of repair and replacement is low
Disadvantages
• Refer to “What About the Safety of Filling Materials”
• Gray colored, not tooth colored
• May darken as it corrodes; may stain teeth over time
• Requires removal of some healthy tooth
• In larger amalgam fillings, the remaining tooth may weaken and fracture
• Because metal can conduct hot and cold temperatures, there may be temporary sensitivity to hot and cold.
• Contact with other metals may cause occasional, minute electrical flow
COMPOSITE RESIN FILLINGS
Composite fillings are a mixture of powdered glass and plastic resin, sometimes referred to as white, plastic, or tooth-colored fillings.
It is used for fillings, inlays, veneers, partial and complete crowns, or to repair portions of broken teeth.
Advantages
❤ Strong and durable
❤ Tooth colored
❤ Single visit for fillings
❤ Resists breaking
❤ Maximum amount of tooth preserved
❤ Small risk of leakage if bonded only to enamel
❤ Does not corrode
❤ Generally holds up well to the forces of biting depending on product used
❤ Resistance to further decay is moderate and easy to find
❤ Frequency of repair or replacement is low to moderate
Disadvantages
• Refer to “What About the Safety of Filling Materials”
• Moderate occurrence of tooth sensitivity; sensitive to dentist’s method of application
• Costs more than dental amalgam
• Material shrinks when hardened and could lead to further decay and/or temperature sensitivity
• Requires more than one visit for inlays, veneers, and crowns
• May wear faster than dental enamel
• May leak over time when bonded beneath the layer of enamel
Toxicity of Dental Materials
Dental Amalgam
Mercury in its elemental form is known to cause reproductive toxicity.
Mercury may harm the developing brain of a child or fetus.
Dental amalgam is created by mixing elemental mercury (43-54%) and an alloy powder (46-57%) composed mainly of silver, tin, and copper.
This has caused discussion about the risks of mercury in dental amalgam. Such mercury is emitted in minute
amounts as vapor.
Some concerns have been raised regarding possible toxicity. Scientific research continues on the safety of
dental amalgam. There is scant evidence that the health of the vast majority of people with amalgam is compromised.
The Food and Drug Administration (FDA) and other public health organizations have investigated the safety of amalgam used in dental fillings. The conclusion: no valid scientific evidence has shown that amalgams cause harm to patients with dental restorations, except in rare cases of allergy.
The World Health Organization reached a similar conclusion stating, “Amalgam restorations are safe and cost effective.”
A diversity of opinions exists regarding the safety of dental amalgams. Questions have been raised about its safety in pregnant women, children, and diabetics. However, scientific evidence and research literature in peer-reviewed scientific journals suggest that otherwise healthy women, children, and diabetics are not at an increased risk from dental amalgams in their mouths.
The FDA places no restrictions on the use of dental amalgam.
Composite Resin
Some Composite Resins include Crystalline Silica, which is known to cause cancer.
It is always a good idea to discuss any dental treatment thoroughly with your dentist.
No comments:
Post a Comment